EAA Builders Log Website
EMail address:
Password:
- Lost my password
close
EAA Builders Log
(An EAA website).
Help
Contact Us
About
Sign Up
Login
Project:
S-21
-
Listing of Entries
(Please mouse-over any icon to get a description of that function).
Categories
Show All Entries
- (272)
Research
- (1)
-
Registration forms...
Workshop
- (1)
-
Inventory Firewall...
Empennage
- (36)
-
Start-Rudder
-
Rudder completed
-
Rudder completed
-
Vertical Stab
-
Vertical stabilizer
-
Vertical Stab frame...
-
Vertical stabilizer...
-
Vertical stabilizer...
-
Riveting vertical...
-
Finish riveting left...
-
Rivet right side of...
-
Tail pull handle and...
-
Horizontal...
-
Rolling elevator skins
-
Elevator frame...
-
Elevator horn...
-
Elevator horn...
-
Riveting elevator...
-
Rivet servo ribs...
-
Drill spars on...
-
Deburring horizontal...
-
Deburring horizontal...
-
Countersink Horiz...
-
Dimple Horiz Stab...
-
Riveting Horizontal...
-
Riveting horizontal...
-
Riveting horizontal...
-
Elevator frame prep...
-
Elevator assembly
-
Rivet top elevator skin
-
Drill trim tab spar,...
-
Rivet trim tab
-
Prep elevator for...
-
Attach trim tab hinges
-
Attach trim tab to...
-
Elevator tips start...
Fuselage
- (48)
-
Fuse bulkhead assembly.
-
Bulkhead assembly
-
lol bulkheads done
-
Tail one belly skin...
-
Rivet longerons,...
-
Tailcone belly...
-
Attach bulkheads to...
-
Tailcone side skins...
-
Tail one side skins...
-
Prep for cage to...
-
Drilling attach...
-
Drilling attach...
-
Magnetometer mount...
-
Riveted the big attach
-
Pics of fuse to tail...
-
Tailcone top skins...
-
Fitting seat slide...
-
Fitting / drilling...
-
Belly and side skins...
-
Add stiffeners to...
-
Reassemble belly...
-
Riveting belly &...
-
Turn over fuselage,...
-
Fitting boot cowl
-
Boot cowl stiffeners
-
Upper boot cowl fitting
-
Fitting upper boot...
-
Fitting upper boot...
-
Fitting boot cowl...
-
Instrument panel brow
-
Finish instrument...
-
Firewall deburred,...
-
Prepping S10-S11...
-
S10-S11 closeout...
-
Lower Boot Cowl Riveted
-
Battery box
-
Cabin Door Right
-
Boot cowl closing fail
-
Boot cowl mistakes...
-
Top of boot cowl...
-
Boot Cowl part deux...
-
Fitting windshield
-
Cleco windshield...
-
Front middle hold...
-
Riveting skylight...
-
Windshield/skylight...
-
Z strips windshield...
-
Windshield bonding
Firewall
- (14)
-
Pick up FWF kit
-
Deburred firewall,...
-
Cleco riveted...
-
Drilling belly skins...
-
Fitting firewall strips
-
Heater Box install...
-
Gascolator &...
-
Heat box and brake...
-
Brake system...
-
Route brake lines
-
Park brake cable...
-
Throttle &...
-
Firewall transducer...
-
Electrical on firewall
Tail Feathers
- (1)
-
Secure horizontal...
Wings
- (93)
-
Deburring front spar...
-
Piece gathering
-
Wing spar...
-
Bellcrank assemblies...
-
Wing truss joined to...
-
Ribfest
-
Cleco ribs to rear spar
-
Rivet ribs to front...
-
Aileron and flap...
-
Aileron cable (left)...
-
Landing light lens...
-
Landing light lens...
-
Dimple leading edge...
-
Countersink front...
-
Cleco top skin (left...
-
Pull countersink...
-
Riveting top skin...
-
Continue riveting...
-
Begin fitting flap /...
-
Rivet flap /aileron...
-
Turn left wing over...
-
Wiring left wing
-
Plumb pitot lines...
-
Gretz pitot mount...
-
Gretz pitot mount pt 2
-
Gretz pitot mount pt 3
-
Plumb pitot lines...
-
Fitting lower skin ,...
-
Rivet bottom skin...
-
Riveting bottom skin...
-
Rivet inspection...
-
Store wing, begin...
-
Left flap assembly
-
Assemble / rivet...
-
Left aileron assembly
-
Test fit left...
-
Right wing started
-
RH landing light...
-
Strut truss fittings...
-
Bolt truss to front...
-
Assemble interior of...
-
Aileron cable and...
-
Flap cable, electric...
-
Match drill RH...
-
Riveting top skin
-
Riveting top skin RH...
-
Flap & aileron...
-
Scotchbright rivets...
-
Flip RH wing for...
-
Countersink leading...
-
Nearly finish...
-
Finish riveting...
-
RH flap construction
-
Finish RH flap
-
Assemble RH aileron.
-
Wingtip support rib...
-
Wing tip cutting
-
Cutting form/jig to...
-
Glue first (left)...
-
Rivet doublers...
-
Reglue open area...
-
Fitting left wingtip
-
Left fuel tank &...
-
Left tank filler cap...
-
Left tank fittings
-
Left filler cap...
-
Rivet left root rib
-
Finish riveting left...
-
Trim right wing tip
-
Fitting RH wing tip
-
Fitting RH wing tank
-
RH Tank fitting
-
R H tank filler cap...
-
RH tank fittings...
-
RH filler opening...
-
R H root rib riveted...
-
Sealing RH filler...
-
Wing tip
-
Wing tips body work
-
Sanding primer
-
Torque Wing Attach...
-
Correct Aileron...
-
Aileron cable tensioned
-
Finish cut wing...
-
Fitting/adjusting...
-
Rigging ailerons
-
Right side flap gap...
-
Adjusting flap...
-
Left flap gap seal
-
Wing lower gap seal...
-
Wing lower gap seal...
-
Wing root cuffs bonded
-
Pushrod ends all...
Controls
- (10)
-
Rudder cable system
-
Rudder cable system
-
Mounted control...
-
Aileron cable...
-
Flap handle install
-
Aileron control...
-
Rear return cable...
-
Rear rudder return...
-
Throttle &...
-
Balance ailerons and...
Avionics
- (10)
-
Exploring placement...
-
Mounted IBBS units (2)
-
Remote mounting...
-
Switch antenna...
-
Wiring stick grips
-
Control grip moles...
-
Solder phone and mic...
-
O A T probe wire...
-
ELT Install
-
Securing various...
Lighting
Instrument Panel
- (4)
-
Panel prep
-
Panel frame mods /...
-
Drilled subpanel for...
-
Fire Extinguisher...
Landing Gear
- (5)
-
Trimming belly...
-
Preparing to fit...
-
Nut plates for gear...
-
Belly fairings fitting
-
Fairings final tweak
Engine
- (30)
-
Picked up engine...
-
Uncrate engine
-
Electrical study
-
Ignition coils and...
-
Cooling baffles
-
Cooling baffles...
-
Cooling baffles
-
Finish baffle frames
-
Final prep &...
-
Prep work for wiring...
-
LSE sensors mounted,...
-
CHT probes, wrapping...
-
Baffle ties and EGT...
-
Start oil cooler mount
-
Oil cooler mounted
-
Exhaust gaskets...
-
Top side engine items
-
Starter power cable
-
Securing wires
-
Alternator B lead...
-
Ignition leads and...
-
Engine fittings and...
-
Coil mount brace /...
-
Lightspeed ignition...
-
LSE a ignition power...
-
Install fuel...
-
Phasing Ignition...
-
Manifold pressure...
-
Air box assembly
-
Cowling work
Propeller
Fuel System
- (1)
-
Header tank trim and...
Interior Finish
- (12)
-
Rear baggage floor
-
Seat assembly
-
Seat assembly
-
Seat frames assembled
-
Seat back pieces and...
-
Seat assembly
-
Seat assembly
-
Seat assembly
-
Seat padding/cushions
-
Seat cushions...
-
Seat cushions finished
-
Wasted time Bedliner...
Paint / Decals
- (4)
-
Paint arrived
-
Paint Booth assembly
-
Mask stripe lines right
-
Masking stripes...
Inspection
Tools
- (2)
-
Splice join aluminum...
-
Top wing skin left...
Builder Name:
Kent Ingram
-
Project:
Rans - S-21 Outbound
-
VIEW REPORTS
Total Hours:
538.2
Total Flight Time:
Start/Last Date:
May 09, 2020 - No Finish Date
Friendly URL:
https://eaabuilderslog.org?s=S-21
Home or Last Project Picture
Dec 05, 2022
Seat cushions finished both seats.
- (2.5 hours)
Category: Interior Finish
Continued to install seat cushions as per instructions on both seats. Almost finished with second seat.
F44C30E2-AC50-4CE5-A630-877E12259CA7.jpeg
09DA4650-138E-49DB-929B-41C3409B5CA1.jpeg
13E7E047-3330-43BC-8EEC-508E4B5D188F.jpeg
D2968E60-3943-4F47-B6D8-113F062D151F.jpeg
59C1738B-920E-49BB-BB17-11FDA8B5176D.jpeg
NOTE: This information is strictly used for the EAA Builders Log project within the
EAA organization
.
-
Policy
-
© Copyright 2024 Brevard Web Pro, Inc.